原文:The reason your portal is showing less than the total bandwidth of the plan is because the total bandwidth is prorated over the 672 hour monthly billing cycle. This will repeat every billing cycle.
For example:
2000GB monthly allowance
2000GB / 672hr = 3GB/hr bandwidth usage allowed.
- At deployment, it shows X/3GB available.
- After 3 hours active, it should show X/9GB bandwidth available, X being the bandwidth remaining based on what you have used up to that point.
- After 672 hours active, it would show X/2000GB available.
- This will repeat every billing cycle.
The reason your portal is showing less than the total bandwidth of the plan is because the total bandwidth is prorated over the 672 hour monthly billing cycle. This will repeat every billing cycle.
你的面板显示的总流量看似比该计划少，是因为总流量是按照（小时比例）分配到每个月账单周期的672小时中的。每个账单周期皆是如此。
For example:
2000GB monthly allowance
比方说：
2000GB 月流量
- At deployment, it shows X/3GB available.
在刚部署实例时，会显示为 X/3GB。
- After 3 hours active, it should show X/9GB bandwidth available, X being the bandwidth remaining based on what you have used up to that point.
部署超过3小时后，会显示为 X/9GB，这里的X是指，扣除这段时间你用掉的流量，至此刻你还剩余的流量。
- After 672 hours active, it would show X/2000GB available.
部署超过672小时后，就会显示为X/2000GB。
- This will repeat every billing cycle.
每个账单周期都会重复上述流程。
发表于 2023-1-2 13:59:10
QQ好友和群
QQ空间
收藏
楼主