ovh已经设置了ipv6，但是没有生效，已经reboot过了

ningfeng.im

1. # This file describes the network interfaces available on your system
   
2. # and how to activate them. For more information, see interfaces(5).
   
3. 
   
4. source /etc/network/interfaces.d/*
   
5. 
   
6. # The loopback network interface
   
7. auto lo
   
8. iface lo inet loopback
   
9. 
   
10. # The primary network interface
    
11. allow-hotplug eth0
    
12. iface eth0 inet static
    
13.         address 15.204.57.4/16
    
14.         gateway 15.204.56.1
    
15.         dns-nameservers 1.1.1.1 8.8.8.8
    
16. iface eth0 inet6 static
    
17.     address 2604:2dc0:202:300::9aa/56
    
18.     gateway 2604:2dc0:202:300::1
    
19.     dns-nameservers 2001:4860:4860::8888 2001:4860:4860::8844

复制代码

有哪里设置错了吗？

royzheng

1. iface enp3s0 inet6 static
   
2.         address 2607:xxxxxxx
   
3.         netmask 128
   
4.         gateway 2607:xxxxxxxxxx
   
5.         autoconf 0

复制代码

我的配置 供你参考

koi

inet6加上这两行

1. post-up route add -A inet6 default gw 2604:2dc0:202:300::1 || true
   
2. pre-down route del -A inet6 default gw 2604:2dc0:202:300::1 || true

复制代码

ningfeng.im

koi 发表于 2023-1-25 22:46
inet6加上这两行

1. iface eth0 inet static
   
2.         address 15.204.57.4/16
   
3.         gateway 15.204.56.1
   
4.         dns-nameservers 1.1.1.1 8.8.8.8
   
5. iface eth0 inet6 static
   
6.     address 2604:2dc0:202:300::9aa/56
   
7.     gateway 2604:2dc0:202:300::1
   
8.     dns-nameservers 2001:4860:4860::8888 2001:4860:4860::8844
   
9.     post-up route add -A inet6 default gw 2604:2dc0:202:300::1 || true
   
10.     pre-down route del -A inet6 default gw 2604:2dc0:202:300::1 || true

复制代码

加上了，重启之后还是没有ipv6

shares

https://www.iloc.eu.org/thread-1125018-1-1.html

ningfeng.im

shares 发表于 2023-1-25 22:59
https://www.iloc.eu.org/thread-1125018-1-1.html

我就是按这个设置的

jian88

面板重装一次系统就可以了

bcdefg

OVH不是给/64的吗，有/56的?

奧巴马

/128 不是56

ningfeng.im

还是不行